-40%
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU
DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU

DTL TTL CMOS Digital Logic Pulse Probe Analyzer Circuit Tester Test Pen 18V XU

$ 12.18

Availability: 100 in stock
  • Product: Logic Probe
  • Frequency Response: No
  • Return shipping will be paid by: Buyer
  • Detectable Pulse Width: No
  • Pulse Rate: No
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • Condition: New
  • Non-Domestic Product: No
  • Bundle Description: No
  • Custom Bundle: No
  • Modification Description: No
  • California Prop 65 Warning: No
  • All returns accepted: Returns Accepted
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Input Impedance: No
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Brand: Unbranded
  • Applicable Regions: All

    Description

    Feature:
    - Handy, Quick and Easy
    - For DTL, TTL and CMOS
    - High Frequescy Response
    - Instant Indication
    - Pulse Memory Function
    How to use:
    1. Connect RED clip to + terminal and BLACK clip to - terminal of the power source of the circuit under test. The supply voltage should not exceed 18V DC
    2. For TTL and DTL, set the upper select switch to the side marked "TIL"
    For CMOS, set the upper select switch to the side marked "CMOS", contact the probe pin to the point to be tested. The LEDs will indicate its logic states:
    A) ALL LEDs OFF -High impedance
    B) RED LED ON - High State (1)
    C) Green LED ON - low State (0)
    D) Orange LED ON - Pulse
    3. For deteching and storing pulse or level transition, set lower select switch to side marked "PULSE" first. Contact the probe pin to the poin to be tested. The LEDs will indicate is basic state. Then set the lower select switch to side marked "MEM", The orange LED will light when any pulse or level transition is detected. The pulse direction, in comparison with the original basic, state, cabe determined. After use, reset logic probe by setting the lower select switch back to side marked "PULSE"
    Package include:
    1 * Logic Probe
    1. We only accept PAYPAL.
    2. Payment is to be completed within 30 days of the end of the auction. Please contact us if you can't make the payment promptly. Otherwise, we will reserve the right to relist the item and the unpaid item report will be made correspondingly.
    Shipping Terms:
    1.Ship to USA only.
    2.Orders processed within 48 hours after payment verification (exclude Weekend)
    3.We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address.
    a. If you are unsatisfied with our item or service, please follow the good eBay practice to contact us before leaving any feedback. We are committed to resolve all issues in a friendly and satisfactory manner. WE ARE HERE FOR YOU!
    b. We always reply to messages within 2 business days (We are off-duty on weekends). If you do not get a response from us, then please check your junk or spam mailbox or kindly send your message to us again as sometimes eBay would fail to forward your message to our mail box
    c. Your opinions about our products or our service are much appreciated!