25L Reptile Incubator Scientific Lab Incubator Work for Small Reptiles 5-60°C

Description

Store Categories
Store Categories
Other
Reptile Incubator
Product Description
Description
Our products are easy to operate, large in space, stable in performance, portable and beautiful in appearance. They can be used in 220V households or 12V cars.
Hatch reptile species: chameleon, snake, crocodile, gecko, tortoise, turtle, turtle, lizard and other reptiles.
Electronic cooling and heating, the true meaning of full temperature control, is different from the previous fan cooling. It can accurately control the temperature, thereby controlling the sex of the reptile.
Specification
Instructions
Cleaning and maintenance
Specification
1.Power supply: AC 220V50HZ
2.Settable temperature: 5
℃
~60
℃
3.Temperature control accuracy: plus or minus 0.5 degrees
4.Environment temp
erature: 20
℃
~25
℃
5.Size: 34 x 42 x 47 cm (measured by hand, a little error)
6.Controllable temperature range: 5~60
°
C, accurate to 1
°
C
7.Power: 60W
8.Power supply: AC 220V50HZ
9.Settable temperature: 5
℃
~60
℃
10.Temperature control accuracy: plus or minus 0.5 degrees
11.Temperature difference: 3
°
Instructions
1.The temperature can be controlled at 5-60 degrees Celsius (36-140 degrees Fahrenheit), and the front panel LCD displays the actual temperature, allowing you to easily grasp and control the temperature, providing a good incubation environment for reptiles.
2.The top light switch in the incubator is located on the front panel, and the external switch can control the internal lighting of the incubator, allowing you to easily observe the incubation process.
3.Power switch:
On the front panel, this switch allows you to open the door of the incubator during the incubation process.
4.Sliding design partitions improve the utilization of hatching space. The water tray at the bottom can maintain the humidity in the incubator.
5.Convenient ventilation device to maintain good air circulation, so that small lives can breathe fresher air.
6.Equipped with a car adapter: it allows you to use it on the car when you are driving or transporting reptile eggs, so as to safely transport reptile eggs.
This configuration is important. It can be used by friends who like to go out to find wild friends, or go out for medical treatment, or buy such as Jintou, Sanxian, Baise, and can be loaded back in a car during face-to-face transactions to avoid damage caused by temperature differences or travel! !
7.Please bury half of the egg in the hatching sand. Check the status of the eggs once a week, and remove unfertilized and interrupted eggs.
8.In order to ensure the humidity, please confirm the remaining amount of water in the water tank every day.
Cleaning and maintenance
1. Accumulation of dust will hinder air circulation and affect the cooling or heating effect of the incubator
2. Power off before cleaning
3. Clean with clean damp cotton cloth and natural detergent, otherwise strong chemicals will corrode plastic parts
4. Cannot be s
ubmerged
5. When cleaning the fan, please use a vacuum cleaner or a soft brush to remove the dust, and then wipe it again with a semi-dry damp cloth
Copyright © 2018 Dianxiaomi